Model 54 Regal Director Stand

Designed with the needs of conductors in mind, this flag ship of the Manhasset music stand line provides a stately and distinctive station for orchestra and band directors. This double-shafted stand has a wide and extremely stable base. The desk (32″ w x 15-1/2″ h) is capable of holding the larger scores. With its built-in accessory ledge and storage pocket behind the desk (18″ w x 12″ t with a 2-1/4″ ledge), the Regal provides the optimum convenience and functionality for the conductor. The height of this conductors stand ranges from 28-1/2″ to 50-1/2″ (ledge to floor) with a maximum overall height of 63-1/2″.

Before you Begin, You Will Need:

• Assembly Instructions
• Parts list
• Proper tools

Caution!

Do not apply any lubricant to the height adjustment shaft, as that may cause the friction grip clutch to lose some of its holding power.

1. First, inspect the carton for any external damage. Report any visible damage to the shipping carrier right away.
2. Carefully open the box and remove all parts.
3. Before you begin, be sure you have the assembly instructions and parts list. Check your parts against the list and be sure you have everything you need for the assembly.
4. Be certain you have the necessary tools on hand as described in the parts list.
5. With the desk on a flat surface, rotate the neck assemblies upward and loosen the upper screws.
6. Remove the ball cup nuts and bolts from both upright shaft assemblies and set aside.
7. Extend the Chrome inner shafts and insert them into the neck assemblies.
8. Tighten the tension screw.
9. Insert the retaining hardware and set the desk and installed shaft assemblies on the floor.
10. Carefully attach the base and tighten securely.
11. Return the stand to an upright position and adjust as desired.