Model 52 Voyager
Designed for the musician demanding portability without sacrificing any Manhasset quality. This portable concert style music stand sports the same built-in features that have made Manhasset famous since 1935. Perfect for touring musicians or groups, the Voyager has the same solid, tilt desk, yet is completely portable. With the Voyager’s twist locking mechanism it only takes a second to assemble or remove the desk and with only two parts to keep track of, the Voyager can also be stored or transported in its own tote bag (sold separately). The Voyager desk is identical to the Symphony Stand desk (20″ w x 12-1/2″ h with 2-1/4″ ledge). The height of this music stand ranges from 26″ to 48″ (ledge to floor) with a maximum overall height of 60-1/2″.
Before you Begin, You Will Need:
- Assembly instructions
- Parts list
- Proper tools
Caution!
Do not apply any lubricant to the height adjustment shaft, as that may cause the friction grip clutch to lose some of its holding power.
- Carefully open the box and remove all parts.
- Check your parts against the list and be sure you have everything you need for the assembly. Be certain you have the necessary tools on hand as described in the parts list.
- With the desk face down, adjust the neck upward, unwrap the shaft, and remove the mounting bolt. Be certain that the shaft is fully compressed.
- Slide the tripodal base onto the shaft. Reinstall the bolt through the bottom of the base and tighten. Open the tripodal base and place the stand in an upright position. Extend the inner shaft. Turn the twist locking cylinder counterclockwise until it comes to a complete stop and is in a comparatively loose position.
- The shaft may now be inserted into the cylindrical cavity of the plastic connector. After the shaft is inserted, turn the twist locking cylinder clockwise to secure the shaft to the connector.
- Your Voyager stand is now fully assembled.
